Join the Association!

 

Int'l Cessna 120-140 Association members and non-members are welcome to REGISTER and participate in our forums. Use your forum username to login once you have registered below. Members can log into the MEMBERS ONLY section of the site using their paid membership number and password.
   CalendarCalendar   FAQ and Forum GuidelinesFAQ and Forum Guidelines    SearchSearch     RegisterRegister 
ProfileProfile Log in to check your private messagesLog in to check your private messages   Log inLog in
Parting out '48 140 and wing parts

 
Post new topic   Reply to topic    The International Cessna 120-140 Association Forum Index -> Parts For Sale
View previous topic :: View next topic  
Author Message
TMc



Posts: 26
Location: Spokane WA

PostPosted: Fri Jul 23, 2010 12:33 am    Post subject: Parting out '48 140 and wing parts Reply with quote

Parting out wrecked 1948 Cessna 140 sn14846. NO: fwf, lift struts, rudder, vertical stab.

I DO have doors with windows and latches, grimes retractable landing light, seats, landing gear (swept forward) to name a few items. Just email or call about any items you may be searching for.

I have these additional parts still avalible as well:

One Cessna 140 Right fabric covered wing includes fuel tank w/gauge and
leading edge landing light complete with lens and lamps. Wing is in near servicable condition with a couple of minor dings. Fabric is in good shape but could use paint. $1000

One pair of Cessna 140 metallized parts wings, disassembled due to corrosion, parts listed as follows or will sell everything together for $800.
R and L aux spar/tip assemblies (no cracks or impact damage)-$250 ea.
R and L wing panels only (length of extruded spar only) various corroded areas but many useble parts- $50 ea.
R and L fuel tanks with gauges, straps, hardware, and fwd tank vent interconnect-$75 ea.
R and L ailerons in servicable condition-$100 ea.
R and L flaps with new hinges in servicable condition (flap torque tube attach brackets it good shape)-$75 ea.

Please pm or email for specific pictures- n1948vpilot@yahoo.com
Tom, 509-496-6569
Spokane WA
Back to top
View user's profile Send private message
Stewart



Posts: 37
Location: Sun Lakes, Arizona

PostPosted: Fri Jul 30, 2010 1:40 pm    Post subject: Do you have this part ????? Reply with quote

I am in need of a "Tailwheel Attachment Bracket "

Cessna #0412139

Stewart
cessna@wbhsi.com
Cell 480-686-6930

_________________
A&P Mechanic
N89281 C-140
Back to top
View user's profile Send private message Send e-mail Visit poster's website
TMc



Posts: 26
Location: Spokane WA

PostPosted: Wed Aug 04, 2010 9:15 pm    Post subject: Reply with quote

I do have the bracket- I sent you an email.
Back to top
View user's profile Send private message
TMc



Posts: 26
Location: Spokane WA

PostPosted: Wed Aug 04, 2010 11:31 pm    Post subject: Reply with quote

Landing gear, window latches, and tailwheel bracket are sold.

Grimes landing light, doors, Maule tailwheel, leafsprings, left elevator, trim tab actuator and more still available.

Wing parts still available.
I will attach pictures of the fabric covered RH C-140 wing. It is the cleanest (inside) wing I have come across. Nose ribs have no repairs and are not dented. The metal is shiney and looks new. Fabric is Ceconite with clips.
Tom



Serv R Wing4.jpg
 Description:

Download
 Filename:  Serv R Wing4.jpg
 Filesize:  228.23 KB
 Downloaded:  116 Time(s)


serv inside2.jpg
 Description:

Download
 Filename:  serv inside2.jpg
 Filesize:  248.76 KB
 Downloaded:  102 Time(s)


Serv wing land lt 2.jpg
 Description:

Download
 Filename:  Serv wing land lt 2.jpg
 Filesize:  210.71 KB
 Downloaded:  100 Time(s)

Back to top
View user's profile Send private message
Mike87U



Posts: 17

PostPosted: Tue Aug 10, 2010 10:05 am    Post subject: Reply with quote

Hi Tom,

I am interested in buying your Trim Tab Acturator (P/N: 0310293-10). The IPC reference is Page 24, item: 12-21. Also the 2 Bushings (P/N: S-15-50). The IPC reference is Page 14, item 14-9 & 14-25. If it is easyer, just sell the Rod with the bushings installed.

Clear Skyies,
Mike 87U
Back to top
View user's profile Send private message Send e-mail
TMc



Posts: 26
Location: Spokane WA

PostPosted: Tue Aug 24, 2010 1:59 am    Post subject: Reply with quote

Mike87U
I've finally gotten back with you-check your PM.

For those interested, Cessna P/N 0851174-2 Bushing is an identical bushing to the S-15-50 except that it is much less expensive and easy to find. The bushing is used on Cessna 400 series cowl flap linkages.

I have a horizontal stabilizer available (some hail damage on the top skins) along with the left elevator, Maule tw and leafspings.
Also a set of straight gear legs, steps and LH gearbox.

Attached is a picture of an old microphone that would make an interesting addition to an original 120/140. Signal Corps T-17-D. I'm guessing it's original (or it could be junk); doesn't appear in the Parts Book.
The second picture is the Grimes Landing Light-asking $400



grimes1.jpg
 Description:

Download
 Filename:  grimes1.jpg
 Filesize:  246.29 KB
 Downloaded:  42 Time(s)


handmic2.jpg
 Description:

Download
 Filename:  handmic2.jpg
 Filesize:  196.57 KB
 Downloaded:  39 Time(s)

Back to top
View user's profile Send private message
djsouza



Posts: 10

PostPosted: Wed Sep 01, 2010 10:57 pm    Post subject: Reply with quote

I'm looking for a boarding step for the pilot's side. Let me know if you have one.

Thanks,
Dave
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    The International Cessna 120-140 Association Forum Index -> Parts For Sale All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
Send e-mail to John von Linsowe
contact the board administrator


Powered by phpBB © 2001, 2005 phpBB Group